Roll crusher ([url=http://www.china-crusher.com/teeth-roll-crusher.html]double roll crusher[/url]) is composed of the roller, support bearings, pressed and regulation devices and drive components. It is also named [url=http://www.hxjqcrusher.com/crusher/double-roll-crusher.html]teeth roll crusher[/url] or [url=http://www.hxjqcrusher.com/crusher/double-roll-crusher.html]roller crusher[/url]. Roll crusher (or roller crusher) is used for middle crushing and fine crushing of all kinds of ores and rocks under mid-hardness in mine, chemical industry, cement, building materials and other industrial sections. This crusher has simple structure and can be operated conveniently. Ideal product size depends on adjusting space between two rollers.
Make sure magnetic separator to work. If non-crushing material (such as solder and class materials) falls into the roller crusher, it will result in parking accident. It should not be used in crushing iron device.The roller crusher is a kind of traditional crushing equipment which has simple structure and high efficiency. The main structure of this crusher is the crushing roller which is composed of axis, wheel hub and roller skin. The most important part is the roller skin because its abrasion will influence the working efficiency of the whole roller crusher greatly.
For roller crusher, it should pay special attention to the protection and maintenance of the spare parts and the whole machine.
1.It should strengthen the deironing work because the non crushing items which enter the roller will damage the crusher. So it should install the deironing device before operation.
2.It should reinforce the check of roller crushing equipment and add lubrication oil to the equipment so as to keep a good and stable condition. In addition, it should check the abrasion of the spare parts and change the spare parts if needed.
3.After long time operation, the abrasion on the roller skin will lead to the ultrafine granularity, so it should check and adjust the discharging mine mouth.
4.To make the chassis flat surface movable and remove the dust lest that the movable bearing can move on the chassis when there is some materials that can not be crushed so that there may be serious accident.
china dryer: http://www.hxjqcrusher.com/Dryer.html
Make sure magnetic separator to work. If non-crushing material (such as solder and class materials) falls into the roller crusher, it will result in parking accident. It should not be used in crushing iron device.The roller crusher is a kind of traditional crushing equipment which has simple structure and high efficiency. The main structure of this crusher is the crushing roller which is composed of axis, wheel hub and roller skin. The most important part is the roller skin because its abrasion will influence the working efficiency of the whole roller crusher greatly.
For roller crusher, it should pay special attention to the protection and maintenance of the spare parts and the whole machine.
1.It should strengthen the deironing work because the non crushing items which enter the roller will damage the crusher. So it should install the deironing device before operation.
2.It should reinforce the check of roller crushing equipment and add lubrication oil to the equipment so as to keep a good and stable condition. In addition, it should check the abrasion of the spare parts and change the spare parts if needed.
3.After long time operation, the abrasion on the roller skin will lead to the ultrafine granularity, so it should check and adjust the discharging mine mouth.
4.To make the chassis flat surface movable and remove the dust lest that the movable bearing can move on the chassis when there is some materials that can not be crushed so that there may be serious accident.
china dryer: http://www.hxjqcrusher.com/Dryer.html